Tips for Installing a Pneumatic Elevator

Over the past decade, pneumatic elevators proved to be one of the mobility industry’s most revolutionary developments. These self-contained units provide the same properties as hydraulic, traction drive, and winding drum operations but at a lower cost and with far less installation required.

Having said that, every homeowner should be fully aware of the installation process of the model Elevator they are interested in. Here is how a pneumatic elevator is installed, why the process is so easy, and how it differs from traditional models.

Most homeowners already know where their pneumatic elevator will be installed before the product is even shipped; however, always double check that the intended location is ideal before fitting pieces together. To do this, make sure there is nothing obstructing the intended path of the system and make sure all persons are aware that installation is about to take place. Pneumatic installation can be done in just a few short hours, as long as the area is properly prepped. Small children and animals should be kept away from the installation site. If needed, ask a neighbor or family member to babysit. Installing a pneumatic without interruptions will make the process easier and less stressful. Undivided attention is critical.

An Overview – First, it is important to know that pneumatic elevators are quick and easy to install. Why? Pneumatic elevators were designed for residential buildings and are built to reach a maximum height of four stops – that's four floors. Since these elevators do not need a constructed shaft, machine room, or pit to operate, installation is simple, through and through.

Simplicity – Many wonder why pneumatic elevators do not require pits, newly-constructed shafts, or even machine rooms. The answer to this is simple: pneumatic elevators consist of a hoist cylinder, a passenger car, and vacuum turbines… that's it. The hoist cylinder acts as a free standing shaft that is clear and see-through due to its glass-like material. The passenger car is powered by the vacuum turbines, meaning that no pulley system, gear boxes, or cables are needed. The car moves up and down depending on air pressure in the tube, and air pressure is controlled by the vacuum turbines.

Installation – Once a homeowner understands the mechanics behind the pneumatic elevator, he or she can then begin to understand how the elevator is installed. First, the hoist cylinder must be built. To do this, panels made of clear plastic are fitted and snapped together. These panels are internally supported by an aluminum frame. Once all pieces are fitted together, the hoist cylinder is complete. The passenger car is then attached to rails inside the hoist cylinder and the vacuum system is fastened either in the car itself or attached to the very top of the cylinder hoist way. Once everything is set into place, the pneumatic elevator is ready for its first riders.

Homeowners who are looking for an economical, space saving, aesthetically appealing, and easy to install model are finding it easy to turn to pneumatic elevators. This maintenance free option is becoming the energy efficient no-brainer for most people looking to save a little extra money.